Anyone on tonight?

Yeah plaiyng out a trunk is not easy to get right for Db's. It going to take some testing. IM thinking the 300 should pressure well. I gain a full db to 149.1 with no charging upgrades. to the 300. it was running at 11A for the burp. Full walled, lots of power and more cone area it should be pretty loud.

demented wrote:

just dont forget the pics cuz u do kick ass work man!!

thanks, Ill have tons of pics for sure. Im already planning to take tons of pick of just unwrapping the sub

Im also workin on makin som 6,7,8, and 10 inch aero ports with mdf. and also different flare styles

James Reed wrote:

Yeah plaiyng out a trunk is not easy to get right for Db's. It going to take some testing. IM thinking the 300 should pressure well. I gain a full db to 149.1 with no charging upgrades. to the 300. it was running at 11A for the burp. Full walled, lots of power and more cone area it should be pretty loud.

sucks getting a good sized setup in to a trunk. I thought cutting my rear deck would help out, now im stuck by the door opening.

fritosaregood wrote:

James Reed wrote:

Yeah plaiyng out a trunk is not easy to get right for Db's. It going to take some testing. IM thinking the 300 should pressure well. I gain a full db to 149.1 with no charging upgrades. to the 300. it was running at 11A for the burp. Full walled, lots of power and more cone area it should be pretty loud.

sucks getting a good sized setup in to a trunk. I thought cutting my rear deck would help out, now im stuck by the door opening.

Yeah thats what i have been pondering with the 300 build. Looking like 2 chambers for sure. Im not going to build inside. Did that with 2 15s bandpass in a trunk of a mustang. Man that was a pain in the ass.

frito: u do any work for $$$$

i was running a atomic 5000.1 last year not to sure about this year. hey james have you ever thought about a IA 21" sub. that would be awsome

taco wrote:

i was running a atomic 5000.1 last year not to sure about this year. hey james have you ever thought about a IA 21" sub. that would be awsome

Only handles 2500 RMS this will be a daily beater. Need more power handling then that. Looking at the Fi BTL loaded good price too.

what u plan on tuning too

FB= 32hz or so. It will be for music. Goal of 155+ If i go to 2 18s im looking at a interchangeable port. One for music and on for SPL

demented wrote:

frito: u do any work for $$$$

ive built up a few boxes for money, then did an amp install so that had too look like nothing was there...even keeping the stock headunit.

heres a little one i did for a transam



and one for my friend jimmy



ive got more ppl that ask,, but never have money to pay


oh and check out the new sub for the gf


that little ten should hold her down till i decide on a 12 to put it
Im still deciding upon, sundown Zv2, audiopulse axis, orion hcca, aq hdc, and getting one custom built

nice, u plan on runing it at all this year or just doing work

demented wrote:

nice, u plan on runing it at all this year or just doing work

Money is a bit tight right now. So the build is going to take me a while for the 300, but i will be bringing the Navi out. May do a SPl port this time too It was set for music not SPL.

frito: i am planing on doing my doors like meade did in his hoe, but i dont have much time to do all the work, it will take me years lol

Nice looking work Frito. You ever done any stuffed T-lines?

"ive got more ppl that ask,, but never have money to pay"

i have the money and gear too just pm me what u think

demented wrote:

frito: i am planing on doing my doors like meade did in his hoe, but i dont have much time to do all the work, it will take me years lol

im looking to build some door panels myself, ill probably have about two hours week to work on my system untill this summer though

James Reed wrote:

Nice looking work Frito. You ever done any stuffed T-lines?

the ones in the pic are stuffed. I have a dayton wt3 woofer tester and i added stuffing and ran imp plots till i got a very little imp peaks

demented wrote:

"ive got more ppl that ask,, but never have money to pay"

i have the money and gear too just pm me what u think

id love to do it, but it would be summer time before i had time to work on it

cool deal. I first started figuring a non stuffed Tl for one L7 but it was going to be to large. Might be able to do if stuffed and tapered. Kinda scrapped the idea though. Going a bit larger on the box for them now and interchangeable ports. The 2 are really beating my truck up though. Ive got right at 300sq feet of mat in the truck. Its stiff but the poor rear side windows are getting beat to death.

who all is showing up on friday?

where? thought Sat was the day?

friday we are hanging out at Street Sounds then sat we are meeting at the basketball courts

What time? depending on weather i might can make it.

i think a trip to the memphis show would be cool too

around 7