New builds :)

Subject: Re: New builds :) Mon Mar 07, 2011 10:59 pm

Wait wait, I thought best was a 156.X ??? And you put up the 153, sandfagger!!!! LOL

Pro Posts : 570 Join date : 2009-01-20

HAHAHAHA a 156 with only one 4k and a musical tuning? Nah never lol!

Subject: Re: New builds :) Mon Mar 07, 2011 11:34 pm

45hz... why not a super high number at 35hz?

Pro Posts : 570 Join date : 2009-01-20

The trucks natural resonace is in the mid 40s range. Im not too far off even at 35hz only about 1db if that. 38hz is only .5 down lol

Subject: Re: New builds :) Mon Mar 07, 2011 11:46 pm

nice.. when you get time can you do a freq resp graph? starting at say 20hz? not full tilt though. Ive been doing this with some of my more recent builds,
although it may be nice to see what it does at 20hz full tilt haha.

Pro Posts : 570 Join date : 2009-01-20

It falls off Very hard at about 30hz I may even close the port off a bit to gain back here. I have not even tried anything below 30hz. Which was about my 3.5db down on lower power. Could be the subsonic being to high too. Have not really checked or set it yet.

Subject: Re: New builds :) Mon Mar 07, 2011 11:56 pm

hopefully its set at around 33 or something haha.

Pro Posts : 570 Join date : 2009-01-20

It very well could be. It just got turned up a bit to like 1/4 turn. i didnt set it using my disc. Might do that first thing tomorrow. Also i noticed on past builds even with an enclosure tuned to like 30hz the truck doesnt like playing below that point. May just be the acoustics of the truck playing a part in it too.

Subject: Re: New builds :) Tue Mar 08, 2011 12:38 am

James Reed wrote:: It very well could be. It just got turned up a bit to like 1/4 turn. i didnt set it using my disc. Might do that first thing tomorrow. Also i noticed on past builds even with an enclosure tuned to like 30hz the truck doesnt like playing below that point. May just be the acoustics of the truck playing a part in it too.

thats no good.

Pro Posts : 832 Join date : 2009-07-28 Location : Searcy

well according to Dr. Subwoofer your doing great with your tuning Surprised

Subject: Re: New builds :) Tue Mar 08, 2011 10:37 am

well he has great lows cuz it is a 15 and it can excurt and change the box size....

Pro Posts : 570 Join date : 2009-01-20

Pro Posts : 570 Join date : 2009-01-20

Thanks Jonatan for the vids. Wish you would have been over at street sounds when that guy bailed out of the truck. Thats would have been a good one lol

Subject: Re: New builds :) Sat Mar 12, 2011 1:36 am

Hey James you look like you don't want him filming you LOL

Pro Posts : 832 Join date : 2009-07-28 Location : Searcy

haha yea our other installer bailed out QUICK. Thanks for swinging by to let me hear. This thing is crazy!

Pro Posts : 570 Join date : 2009-01-20

Ok so as some of you know my rear hatch would not open. So I have not been able to get anymore done on the build till I figured out what was going on and could open the back hatch. So here is a little of how it went down.

Back panel out and license plate assembly out to check lock release actuator, power actuator cable release and handle cable release. All check out
New builds :) - Page 4 IMAG0281

So now I have to start ripping mat out to get access to the other ends of the connections through access holes.
New builds :) - Page 4 IMAG0283

Come to find out a nut had broken off from the license plate assembly, found its way lodged in between the lock mechanism causing it to not release. Here is the ittle Focker responsible for all my headache and trouble.
New builds :) - Page 4 IMAG0284

So now a little mat to cover wholes back up, cover back on and proceed with build lol

Pro Posts : 832 Join date : 2009-07-28 Location : Searcy

at least you didn't have to buy anything new

Pro Posts : 570 Join date : 2009-01-20

Yeah, luckly I have enough mat layin around to do what i need to redo. So all in all not bad. Could have been worse.

Pro Posts : 570 Join date : 2009-01-20

Subject: Re: New builds :) Wed Apr 06, 2011 12:25 am

be a man and roll the window all the way down.

Pro Posts : 570 Join date : 2009-01-20

Drivers side is open all the way. Does just as good passenger all the way down too. Wind kept catching it though was pretty windy. With the window up a bit it helped to keep it inside the truck. But too make you happy how about I do one better and do it door open?