i need some ideas

i want to build a box for a dd2515. i have a 300 watt fosgate amp so i don't have very much power at all but someday i will upgrade. i was wondering if anybody had any ideas for a box design?

talk to andrew he designed and built my box

The standard DD box design would be a good starting point. Just depends on how big you want the box to be. These would tune the box between 35-40hz.




3.00^ft (3-4) 8" or (2) 10" or (1) 15" 48.0 sq" vent x 20" long
3.25^ft (4) 8" or (2) 10" or (1) 15" 52.0 sq" vent x 20" long
3.50^ft (4) 8" or (2) 12" or (1) 15" 56.0 sq" vent x 20" long
3.75^ft (3) 10" or (2) 12" or (1) 15" 60.0 sq" vent x 19.5" long
4.00^ft (3) 10" or (2) 12" or (1) 15" 64.0 sq" vent x 19" long
4.25^ft (3) 10" or (2) 12" or (1) 15" 68.0 sq" vent x 19" long
4.50^ft (3) 10" or (2) 12" or (1) 15" 72.0 sq" vent x 19" long
4.75^ft (3) 10" or (2) 12" or (1) 15" 76.0 sq" vent x 18.5" long
5.00^ft (3) 10" or (2) 12" or (1) 15" or 18" 80.0 sq" vent x 18" long

If it was me, I would go for the last one in the list above with a slightly bigger port and some dynamat inside the box, but that is if you have the room for a 5 cube box.

well i'm gonna fold the back seats down in my truck so room should not be an issue. The first box i built for it dd recomended the port to be almost double in square inches. thanks for the input.